The Best Way to Implement a Fishfinder

Basically, a fishfinder is an indispensable tool that you need to bring along when you travel. Nevertheless, if it is not installed precisely, it might become troublesome. First of all, you ought to ensure that the fishfinder is located somewhere easy to access and easy to read. There are some issues that users usually ignore when it comes to a fishfinder, including the function of the wires, the placement, and so on. A fishfinder might seem to be easy to install, it can actually lead to a lot of troubles. Therefore, this tutorial leads you through the process of installing a fish finder in the right way.

Things You Have to Prepare

Before installing the fishfinder, it is crucial that you prepare a set of appropriate tools since you will not be able to launch the project if you are lacking in the necessary tools. As a result, I strongly recommend that you skim through this checklist to make sure that you are ready to start.

  •        Wire fish
  •        Wire crimper
  •        Fishing rods
  •        Heat shrink tubing (adhesive-lined)
  •        Mounting hardware
  •        Clamshell fitting
  •        Barrel connectors (if available)
  •        Terminal connectors
  •        Silicon sealant
  •        Cable ties
  •        3M 5200 adhesive
  •        Head screwdriver

The Process of Setting Up a Fishfinder

Step 1: Register your Fishfinder

The first thing that you need to do to get your fishfinder started is to register for it. By providing your email to the manufacturer, they can respond instantly in case there is any problem with your fishfinder. Not to mention that you are also able to gain access to alerts and updates to constantly enhance its efficiency.

Step 2: Keep Updated with the Software

As soon as you open the box, it is important that the fishfinder is updated immediately. Fishfinders might come along with micro SD slots that let users expand the memory space so that more pictures can be stored, but you may have to format it in advance. Updating the fishfinder enables you to put the software into use instantly without having to wait.

Step 3: Look for an Appropriate Spot

The next step is to find a perfect spot for the fishfinder on your boat. It should be located at a place which is easy to see such as near the boat’s helm. Typically, the height between your shoulder and waist is an excellent angle for the users. Not only does a right spot allow you to use the fishfinder easily, but it can also help you avoid eye strain.

Step 4: Find the Power Source

You should also ensure that the wires are connected to a specific power source such as a batter, which is the most convenient method to empower your wires. The wires have to reach easily, but it should not leave behind too much slack. After drilling the holes, you can lengthen or shorten the wires as you want. Being able to locate the power source and the fishfinder let you install it effortlessly.

Step 5: Drill the Holes

This step requires you to being drilling holes for the wires and the mount. You had better turn the drill to full speed in order not to cause splinters. Moreover, the unit’s wires need both an entry and an exit point. It is vital that the hole be large enough so that the wires can go through. Finally, test the new hole with the binnacle and your fishfinder.

Step 6: Add Sealant

Before setting up your fishfinder, sealant needs to be added to the hole along with the wires. There is no need to add a lot of sealants, only a sufficient amount is needed to keep everything stable. What’s more, you should also apply sealant to the bolts with a view to keeping the fishfinder mounting, leading to a tougher bond.

Step 7: Activate the Power Leads

This step gives you a hint whether you need to shorten or lengthen the wires. If you need more length, make sure that the extra ones have the same color. Barrel connectors are a good choice if you need additional length. After the exit hole has been formed, the wires ought to lead to the power source while being attached to your fishfinder. Another essential thing is to ensure that the wires wrap around the ties, approximately 18 apart.

Step 8: Connect the Wires to the Transducer

A transducer is a tool that tells users what the fishfinder is displaying. Therefore, it should be located in the far bottom of the bottom, being covered by any waterproof material. It is also essential that the transducer mount is held against the transom, not to mention that the wires have to run to the dash.

Step 9: Set Up the Transducer

Wrap the transducer around the wires, and look for the markings you make for the mount. Add a lot of sealant in order to form a thick cover preventing water from coming in the boat. After you have tightened the bolts, the transducer is ready.

Step 10: Hook Up the Platform

One of the choices is to move to the boat’s top where the fishfinder is located. After that, turn off the battery before taking the wires and hooking them up, then connect your fishfinder to the power source. If the fishfinder does not work, it is recommended that you check whether the connection between the wires are tight or not. If there is no problem with the wires, you should check out the transducer. Remember that the sealant needs to be entirely dry before you sink the boat in the water.

Leave a Reply